New products

J3030 CR-10 Style Mechanical kit

CR.10.30
Juthour 3D printer mechanical Kit help you to build a 3D printer that can giving you a 30x30x40 working area. Kit contents all mechanical parts that you need to build you 3D printer without motors or electronics.
$210.00 $186.00

3D Printer J3030 Xtreme Full Kit

XT.30.FK
3D printer full Kit help you to build a 3D printer that can giving you a 30x30x30 working area. Kit contents all printer parts that you need to build you 3D printer and You can choose the components of the printer yourself. You can also assemble the printer yourself or choose an assembly. You can add the services you want to obtain with the printer.
$523.20 $438.00

3D Printer Graber i3 Wooden Frame Kit

g.i3.w
The Graber i3's design is uniquely suited towards building it with a laser cutter or even a simple CNC cutting machine, such as the Shapeoko. It derives from the original Prusa i3 design, and replaces all 3D-printed parts for completely wooden ones. Build volume: 200 x 200 x 200 mm Material: MDF Wood
$18.00

J3030 PCB Machine Full Kit

PCB.30.FK
PCB milling has advantages for both prototyping and some special PCB designs. Probably the biggest benefit is that one doesn't have to use chemicals to produce PCBs. When creating a prototype, outsourcing a board takes time. Alternative is to make a PCB in-house. Using the wet process, in-house production presents problems with chemicals and disposing thereof. High-resolution boards using the wet process are hard to achieve and still, when done, one still has to drill and eventually cut out the PCB from the base material. CNC machine prototyping can provide a fast-turnaround board production process without the need for wet processing. If a CNC machine is already used for drilling, this single machine could carry out both parts of the process, drilling and milling. A CNC machine is used to process drilling, milling and cutting. Many boards that are simple for milling would be very difficult to process by wet etching and manual drilling afterward in a laboratory environment without using top of the line systems that usually cost multiple times more than CNC milling machines. In mass production, milling is unlikely to replace etching although the use of CNC is already standard practice for drilling the boards.
$498.00 $419.94

Arduino nano USB V3.0 ATmega328P 5V 16M Micro-controller board

03.00.10
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
$9.60 $7.50

Arduino Mega 2560 Compatible Base on ATMEGA2560 MCU

03.00.01
The Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a
$18.00 $15.00

Arduino UNO R3 Development Board

03.00.62
Microcontroller: ATmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin:50 mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328) EEPROM: 1 KB (ATmega328) Clock Speed: 16 MHz
$12.00 $9.00

Control Board Ramps 1.6 for 3D Printer

03.00.39
RAMPS 1.6 interface board with new, more powerful SMT MOSFET drivers Improved heat dissipation with new heat sink,the PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes The power supply and hot bed use 30A high-current terminal block, to avoid the situation of burning terminals to a greater extent Added a reset expansion interface, convenient for users to extend the reset button, X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board is suitable for more models Design of plate pin socket can be easily replaced or removed for future design, Changed the silk screen, making the wiring clear at a glance. Using a combination of colored pin headers and mothers, effectively distinguishing each functional interface, both beautiful and practical
$13.80 $10.80

Build Plate For 3D Printer 300x300mm - 3mm

01.07.02
Build Plate For 3D Printer Size: 33cmx33cm Working Area: 30x30 Material: Aluminum Thikness: 3mm Color: Silver
$15.00

Print Surface For 3D Printer 400x400mm - 3mm

Size: 430 × 430 × 3mm Pitch: 400 x 400 mm
$18.00

3D Printer Frame Kit 40x40 (Silver) (Aluminum)

Type : Maintenance Kit Brand : Other Aluminum 3D Printer Frame Kit Material: Aluminum Color: Black Type: Kit Compatible With: 3D Printer Contents: M5x10: 10 M5x25: 16 M5 Square Nut: 10 T Joining Plate (Steel): 2 V-Slot 20x20 Linear Rail: 3 V-Slot 20x40 Linear Rail: 4 V-Slot 0.5meter Linear Rail: 7 Working Area: 40x40
$48.00

3D Printer Frame Kit 40x40 (Black) (Aluminum)

Type : Maintenance Kit Brand : Other Aluminum 3D Printer Frame Kit Material: Aluminum Color: Black Type: Kit Compatible With: 3D Printer Contents: M5x10: 10 M5x25: 16 M5 Square Nut: 10 T Joining Plate (Steel): 2 V-Slot 20x20 Linear Rail: 3 V-Slot 20x40 Linear Rail: 4 V-Slot 0.5meter Linear Rail: 7 Working Area: 40x40
$51.00

Motor Spacer For J3030 Style

Motor Spacer For J3030 Style Material: Aluminum Color: Silver Thikness: 3mm
$2.40

Anti-Backlash Nut Block for 8mm Metric Acme Lead Screw

04.00.213
THE 8MM ACME ANTI-BACKLASH NUT BLOCK IS A GREAT CHOICE FOR ANY PROJECT REQUIRING LEAD SCREW LINEAR MOTION. "THE PITCH AND DIAMETER ARE A PERFECT COMBINATION OF HIGH TORQUE AND SPEED. THIS SCREW FITS THE BILL FOR MOST MACHINE DESIGNS AND HAS QUICKLY BECOME A STANDARD FOR OPENBUILDS BUILDERS!" QTY :1 TR8X8(P2) METRIC ACME TAP MOUNTING HOLE SPACING: 20MM PITCH: 2MM LEAD: 8MM DELRIN COLOR: BLACK BRAND : OPENBIULDS TYPE : 3D PRINTER ACCESSORIES BRAND : OPEN BUILDS TYPE : 3D PRINTER ACCESSORIES
$4.80

Nut Block for 8mm Metric Acme Lead Screw

04.00.221
QTY. 1 TR8*8(P2) METRIC ACME TAP PITCH: 2MM LEAD: 8MM DELRIN COLOR: BLACK
$6.60 $3.00

Featured products

Bestsellers