Electronics 3D printing is an area of additive still in its infancy. With plenty of space for potential commercial competition, it is interesting to note upcoming developments in the field from the research sphere. For that We have all the electronics you will need to build your own 3D printer: Controller boards, stepper drivers, digital displays or power supplies, and others.
A4988 DRV8825 Stepper Motor Driver Control Shield Expansion Board for 3D Printer Parts
You can use A4988 / DRV8825, take care of the direction when inserting, or it may burn down the driver.
The jumper hits the position of ON DP to indicate 16 subdivision (4988) or 32 subdivision (8825).
White connector: for connection motor.
Female Power connector: for connects 5V and 12V-24V power.
E, S, D, respectively corresponding to the connection of the Enable/Step/Dir – drive signal output
The Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a
Model Number : DRV-8825
Brand : Arduino
STEPPER MOTOR DRIVER MODULE FOR ARDUINO AND RASPBERRY PI DIY PROJECTS INVOLVING STEPPER MOTOR DRIVING SUCH AS 3D PRINTERS, LASER CUTTER AND ENGRAVER AND DESKTOP CNC MACHINE. SPECIFICATIONS:
SIX DIFFERENT STEPS RESOLUTIONS: FULL STEP, HALF STEP,
LOW RDS ON TOTAL RESISTANCE BETWEEN THE DRAIN AND SOURCE
OUTPUTAUTOMATIC CURRENT DECAY MODE DETECTION AND SELECTIONSYNCHRONOUS RECTIFICATION FOLLOW POWER DISSIPATIONINTERNAL UNDER VOLTAGE LOCKOUT UVLOCROSS CURRENT PROTECTION3.3 AND 5V
COMPATIBLE LOGICSUPPLYTHERMAL SHUT DOWN CIRCUITRYGROUND FAULT PROTECTION LOAD SHORT CIRCUIT PROTECTIONOPTIONAL STEP FIVE MODES.
Power supply switching type SMPS 12v regulated & adjustable 15% more or less voltage, up to 30A max current Not to be used as car battery charger / inverter for Surveillance cameras, alarms, engineering projects You can get different sources with 3 pin out voltage regulators details will be at item box Certification : CE , ISO9001 PASS Please change to Arabic language page for more ...
DC TO DC CONVERTER 9V/12V/24V TO 5V 2A USB STEP DOWN POWER MODULE CAR CHARGER
FOR MOBILE POWER, MOBILE PHONES, TABLET AND ANY USB 5V POWERED DEVICES.
OUTPUT: 5V / 3A
CONVERSION EFFICIENCY: 96% (MAX)
SWITCHING FREQUENCY: 1.5MHZ (MAX) TYPICAL 1MHZ
WORKING TEMPERATURE: -40 ℃~+ 85 ℃
LOAD CAPACITY: MAXIMUM OUTPUT 3A, TYPICAL 2A
SIZE: 43MM X 16MM X 5MM (LXWXH)
PACKAGE INCLUDE ": 1X DC-DC STEP DOWN CONVERTER 9V/12V/24V TO 5V/2A USB
NOMINAL RESISTANCE: R25(25℃)（USUAL）1.5K,2K,5K,10K,20K,30K,47K,50K,100K,200K,500K AND SO ON.
RESISTANCE ACCURACY: ±1%，±2%,±3%
B R25/50: （USUAL）3435K,3600K,3950K,3990K,4100K,4200K AND SO ON
B ACCURACY: ±1%
TEMPERATURE RANGE: -40℃～+300℃
MAX RATED POWER: 45MW
RESISTANCE TEMPERATURE COEFFICIENT: -2～-5%/℃
SUGGESTED PARAMETERS: R25℃=100K B25/50=3950K(±1%)
PACKAGE INCLUDE :1X NTC 3950 THERMISTORS-BIG HEAD SIZE WITH DUPONT
Tl-Plus Smooth V1.0 Kit Addon Module For 3d Printer Motor Driver Parts 3D PRINTER leTL-Plus Smooth is a module addon for 3D printer stepper motor. The board provides flyback diodes (freewheel diodes) for the motor outputs, so that they are also protected against induction voltages in the motor-free state of the driver. You will have got smoother
• 12V 5A Single Output Switching Power Supply
• The Single Switching Power Supply has wide input voltage range, steady and precise output voltage.
• Full load burn-in test.
• Over current, over voltage, short circuit protection.
• Low output ripple and noise.
Specification of the Power Supply:
• Input voltage: AC110V-220V
• Input frequency: 47-63hZ
• Output voltage: 12V
• Output current: 5A
• Output voltage adjustment range: ±10%
• Size: ~(L)15.8 x (W)9.7 x (H)4.2cm, ~(L)6.2″ x (W)3.8″ x (H)1.65″
• Color: as photo shown
• Weight: 420g
RAMPS 1.6 interface board with new, more powerful SMT MOSFET drivers
Improved heat dissipation with new heat sink，the PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes
The power supply and hot bed use 30A high-current terminal block, to avoid the situation of burning terminals to a greater extent
Added a reset expansion interface, convenient for users to extend the reset button, X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board is suitable for more models
Design of plate pin socket can be easily replaced or removed for future design, Changed the silk screen, making the wiring clear at a glance. Using a combination of colored pin headers and mothers, effectively distinguishing each functional interface, both beautiful and practical
FTARP05 – PT100 waterproof PTFE Silver plated copper cable 4*30mm stainless steel polish rod probe head (RTD temperature sensor)
Measuring range from -200 to 420 °C
Model number FTARP05 series
Mounting form Polish rod probe
Probe material Stainless steel
Probe diameter Standard is Φ4mm
Probe length 30mm
Cable Length : 50cm
Cable material Silver plated copper , PTFE Silver plated copper (Waterproof, insulated)
Thermal response time <0.5s