3D Printer Extruder & Accessories

The 3D extruder is the part of the 3D printer that ejects material in liquid or semi-liquid form in order to deposit it in successive layers within the 3D printing volume. In some cases, the extruder serves only to deposit a bonding agent used to solidify a material that is originally in powder form. So Turning your 3D printer into a better machine is possible with our wide selection of 3D printing accessories and extruder. 

View as Grid List
Sort by
Display per page

AC POWER CONNECTOR CHASSIS MOUNT

06.10.06
AC Power Connector chassis mount , use with normal AC power cable like PC power Cord. Brand : Other Type : POWER CONNECTOR
$1.20

AC POWER CONNECTOR WITH FUSE HOLDER

06.11.06
AC POWER CONNECTOR WITH FUSE HOLDER CHASSIS MOUNT TYPE , USE WITH NORMAL AC POWER CABLE LIKE PC POWER CORD.
$1.20

AC Power Connector With On/Off Switch - Panel Mount

06.02.01
IEC POWER JACK FOR CHASSIS MOUNT WITH 10A FUSE HOLDER FOR CLIP USE AND ON/OFF SWITCH, BLACK. REGULAR VOLTAGE: 250V / 10A TEMP.: -40° +-80°
$1.20

Filmant Spool Holder Acrylic

06.00.07
Brand : Other Type : 3D Printer Accessories Aclyric Thickness: 6mm Color: Transparent
$5.40

Large Control Box Kit For 3D Printer

08.00.05
Larg Control Box For 3D Printer Used to hold Ramps and Arduino Mega/Uno and Power Supply SMPS have slot for AC POWER CONNECTOR WITH FUSE HOLDER AND SWITCH and Fan Kit Contains: M3x15 Screw - Pack 50 M3 Steel Nut - Pack 50
$9.00

Plastic Towline Cable Drag Chain 10x15 1 Meter

06.12.07
This is 10 x 15mm 1m Cable Drag Chain Wire Carrier. Cable drag chains are the umbilical cord of modern machines. Drag chains are convenient as well as a perfect way to route the wires of your CNC machines. They minimize downtime, protect, support and extend the service life of cables and hoses. We offer Cable Drag Chains that are specially designed and manufactured to meet the needs of 3D Printers. Cable Drag Chains, that we provide, offer security & guide cables and hoses to all types of movable equipment in places where power is needed. Note: The 10 x 15 is an Inner to inner free space available for Wire. Features : Reinforced nylon with high pressure and tensile load, good toughness, high elasticity and abrasion resistance, flame retardant, high-temperature stable performance can be used outdoors, nylon towline content determines how much to use strength and wear resistance and noise level up and running. Resistance to: oil, salt, and a certain acid, alkali capacity. Speed and acceleration (specific speed, acceleration, as the case may be running). Long operating life. Chain shape like gram chain link by a large number of units composed of freely rotating between links. A unit chain around the chainplate and the upper and lower cover plates, towline can open each section, easy assembly and disassembly without threading, to the cable, tubing, pipe, pipe, etc. into the towline open the cover. Package Includes : 1 x Cable Drag Chain 10 x 15mm 1m
$7.80

Plastic Towline Cable Drag Chain 7x7 1 Meter

06.08.07
Open on both side, move flexibly, low noise, easy installation. Suitable for using in reciprocating motion of the occasion, is able to built in cable, tubing, water pipes, etc. Used widely as a component and sevice parts in CNC machine tools,3D printers, electronic equipment, counting devices, machinery and electrical machines ,etc INTERNAL SIZE : 7X7MM EXTERNAL SIZE :10 X14MM TOTAL LENGTH : 1M 1000MM COLOR : BLACK WEIGHT : 0.09KGS PACKAGE CONTENT : 1 X CABLE DRAG CHAIN
$6.60

Wooden Control Box Kit For 3D Printer

08.01.05
Type : 3D Printer Accessories Brand : Other Small Control Box For 3D Printer Components: 23 M3x15 23 M3x Nut 4 Spacers 6 Copper bases 6 M3x8 Countersunk Screws
$6.00

3D Printer Wade extruder cr8

03.00.144
ITEM TYPE:J-HEAD MATERIAL:ALUMINIUM Nozzel:0.4MM FILAMENT:1.75/3MM COLOR:SILVER/RED
$18.00

3D PRINTER LEFT PART 1.75MM FILAMENT MAKERBOT MK10 EXTRUDER FEEDER DEVICE

03.00.136
THIS MK10 ALL METAL EXTRUDER FEEDING PARTS IS USED FOR MAKERBOT 3D PRINTER FEATURE: FILAMENT SIZE: 1.75MM THIS MK10 ALL METAL EXTRUDER FEEDING PARTS IS USED FOR MAKERBOT 3D PRINTER COMPATIBAL WITH: 1.75MM FILAMENT MK10 EXTRUDER 3D PRINTER
$6.00

Extruder Aluminum heating block

04.00.20
3D PRINTER PART HEATING BLOCK HEAT HEAD ALUMINUM BLOCK 20 MM * 20 MM * 10 MM FOR MK7 MK8 SPECIAL-PURPOSE
$1.20

MK8 All-Metal Remote Extruder for 1.75mm 3d Printer Parts

03.00.135
It apply to 1.75mm Filament Professional 3D printer accessories.
$8.40

3D Printer Parts Extruder Upgrade MK8 Extruder 3D Printer Bowden Extruder Nozzle 0.4mm Feed Inlet Diameter 1.75 Filament

03.00.145
Print Material ABS PLA 1.75mm Cooling fan operating voltage 12V Extrusion head heating voltage 12V
$38.40

All Metal Bowden Remote Extruder Kit 1.75mm (MK8)

03.00.137
THIS KIT IS A COMPLETE SETUP FOR 3D PRINTER BOWDEN EXTRUDER. MAIN EXTRUDER BODY COMES PRE-ASSEMBLED FOR YOUR CONVENIENCE. THIS IS RELIABLE AND VERY DURABLE CONSTRUCTION AND BUILD QUALITY IS VERY GOOD. FILAMENT DRIVE GEAR HAS VERY SHARP TEETH AND WILL PROVIDE PERFECT GRIP.
$23.40

3D Printer Accessories reprap bulldog Extruder Parts Remote Proximity Full Metal E3D Jhead

03.00.139
3D Printer Accessories reprap bulldog Extruder Parts Remote Proximity Full Metal E3D JheadAll metal reprap Bulldog bulldog, Universal All-Metal Extruder Bulldog, Bulldog can be used for many DIY 3D printers and can be embedded in most J-head nozzles, support1.75mmwith3mmTwo supplies, compatible with E3D / J-head / MK8 and other popular hot side.Features:Symmetrical design (motor mounted on the left or right)Fully assembled and testedAll metal extruderStable and precise extruder driveDirect drive extruderConfigurable 42 stepper motors and high precision planetary gear motorsCan be driven as a short-range or remote extruderEasy to wire, just push the bar by handCompatible with E3D / J-head / MK8 and other popular hot endNote: This baby only part of the extruder, without gear motor transition block, motor and hot side. (Bare metal)
$21.00

3D printer parts Reprap aluminum alloy left-hand Makerbot Replicator 1 & 2 Extruder Upgrade Replicator 2X Extruder (no motor)

03.00.138
3D printer parts Reprap aluminum alloy left-hand Makerbot Replicator 1 & 2 Extruder Upgrade Replicator 2X Extruder (no motor) Name : reprap alumniu8m alloy left-hand Markerbot replicator 1&2 extruder upgrade Replicator 2x extruder upgrade Matrieal : akuminum alloy Crafrs : sandblasting oxidation Direction : left-hand Range : reprap makerbot replicator 1&2 3d printer parts
$13.80

3D printer Wades extruder hobbed bolt

04.00.105
3D PRINTER WADES EXTRUDER HOBBED BOLT, 8MM DIAMETER AND FEED TEETH SPACE 1MM FOR 3MM,1.75MM .
$0.60

MK8 Extruder Gear 26 Tooth ( Brass) 5mm

04.00.01
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY SUITABLE FOR: 3D PRINTER BORE: 5MM MATERIAL: BRASS TOOTH NUMBER: 40 PACKING INCLUDED: 1X MK8 EXTRUDER GEAR 40 TOOTH
$1.50

EXTRUDER COOLING HEAT SINK 40X40X11MM

04.00.108
40 X 40MM COOLING FIN HEAT SINK FOR MAKERBOT 3D PRINTER DIMENSION: 40 X 40 X 11MM THIS HEAT SINK IS DESIGNED FOR MAKERBOT. IT IS A GOOD CHOICE FOR COOLING YOUR 3D PRINTER EXTRUDER.
$2.40

MK8 Stainless Steel Extruder Drive Gear 5mm Shaft 40 teeth

04.00.106
Type : 3D Printer Accessories Brand : Other
$1.20

MK8-RED EXTRUDER-LEFT (Long Arm)

03.00.148
1.75mm Filament Golden Right Left Long Hand 3D Printers Parts Block MK8 Extruder This modified MK8 Extruder has a filament guide tube,all screws,spare drive gear,and upgraded Bowden tube fitting,for CR-10 3D Printer.Our design gives complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. Full metal aluminum alloy,diy aluminum block,need to assemble by yourself.with better stronger pressure pushing the filament into the printer nozzle Color:gold material:metal Size:1.75 mm Direction:Left Package Contents: 1 set * frame 8 * screws 6 * accessories Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
$9.00

MK8-GOLDEN EXTRUDER-RIGHT (Long Arm)

03.00.149
1.75mm Filament Golden Right Left Long Hand 3D Printers Parts Block MK8 Extruder This modified MK8 Extruder has a filament guide tube,all screws,spare drive gear,and upgraded Bowden tube fitting,for CR-10 3D Printer.Our design gives complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. Full metal aluminum alloy,diy aluminum block,need to assemble by yourself.with better stronger pressure pushing the filament into the printer nozzle Color:gold material:metal Size:1.75 mm Direction:Right Package Contents: 1 set * frame 8 * screws 6 * accessories Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
$9.00