CNC Machines

View as Grid List
Sort by
Display per page

CNC Driver DM542 two-phase hybrid stepper motor driver 4.2A

08.01.01
The DM542E is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542E can drive a stepper motor at much lower noise, lower heating, and smoother movement.
1,155.00 ج.م.‏

ER11 - 35L 5mm With ( Collet 4mm )

11.00.116
Brand : Other Type : Drill Chucks Is It a Set : Yes
320.00 ج.م.‏

1605 Ballscrew And Nut 250mm Bearing

05.08.170
Specification‎:‎ Rolling Block Material‎:‎ bearing steel Total length‎:‎250mm Features‎:‎ Screw are used in TBI screw‎,‎ good finish‎,‎ uniform hardness‎,‎ high accuracy‎.‎ Between the feed screw nut having a spiral groove provided with a ball ‎(‎as intermediate transmission member‎)‎‎,‎ to reduce friction‎.‎ High transmission efficiency‎,‎ high positioning accuracy‎,‎ long service life‎,‎ transmission reversibility‎.‎ Caution‎:‎ Do not unscrew the screw nut ‎(‎‎(‎to prevent detachment screw‎)‎
840.00 ج.م.‏

5V 4-Phase 28BYJ-48 Stepper Motor + ULN2003 Driver Board

05.00.136
DESCRIPTION: Small size stepper motor ideal for driving mini DIY projects such as mini plotter, 3D printer and mini laser cutter. Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Drive Module Board Size: 2.8 x 2.8 x 2 cm Stepper motor Size: 3.2 x 3.2 cm
90.00 ج.م.‏

5V Small Stepper Motor

05.00.135
Voltage: DC 5V Diameter: 28mm Step Angle: 5.625 x 1/64 Reduction Ratio: 1/64
60.00 ج.م.‏

DC Geared Motors for Robots Straight Shaft

05.00.139
This DC geared motor can be connected directly to our robot tires without any couplings. This is an advantage as it reduce assembly COMPLICATIONS. SPECIFICATIONS• VOLTAGE: 4.5 V DC• NO LOAD SPEED: 90 +/- 10RPM • NO LOAD CURRENT: 190MA (MAX.250MA) • MINIMUM TORQUE: 800 GM.CM
30.00 ج.م.‏

DC motor 775 12V

08.09.03
Model 775 Shaft Diameter 5mm Shaft length 17mm Body length 66.7mm Front steps diameter 17.4 mm Former high level 4.7 mm Body diameter 42 mm Motor Overall Length 98 mm Diagonal installation pitch 28.8 mm Mounting hole size M4 Mounting hole 2 Torque 2kg.cm or 0.2N.M
300.00 ج.م.‏

DC motor 775 36v

08.05.03
Model 775 Shaft Diameter 5mm Shaft length 17mm Body length 66.7mm Front steps diameter 17.4 mm Former high level 4.7 mm Body diameter 42 mm Motor Overall Length 98 mm Diagonal installation pitch 28.8 mm Mounting hole size M4 Mounting hole 2 Torque 2kg.cm or 0.2N.M 35v
650.00 ج.م.‏

5 Axis CNC Breakout Interface Board

03.00.65
Model: CNC-INTERFACE5 Location : A4-1 Weight: 0.90kg
280.00 ج.م.‏

J3018 Pro PCB & CNC Machine

J.3018.Pro
PCB milling has advantages for both prototyping and some special PCB designs. Probably the biggest benefit is that one doesn't have to use chemicals to produce PCBs. When creating a prototype, outsourcing a board takes time. Alternative is to make a PCB in-house. Using the wet process, in-house production presents problems with chemicals and disposing thereof. High-resolution boards using the wet process are hard to achieve and still, when done, one still has to drill and eventually cut out the PCB from the base material. CNC machine prototyping can provide a fast-turnaround board production process without the need for wet processing. If a CNC machine is already used for drilling, this single machine could carry out both parts of the process, drilling and milling. A CNC machine is used to process drilling, milling and cutting. Many boards that are simple for milling would be very difficult to process by wet etching and manual drilling afterward in a laboratory environment without using top of the line systems that usually cost multiple times more than CNC milling machines. In mass production, milling is unlikely to replace etching although the use of CNC is already standard practice for drilling the boards.
3,500.00 ج.م.‏

J3030 PCB Machine Full Kit

PCB.30.FK
PCB milling has advantages for both prototyping and some special PCB designs. Probably the biggest benefit is that one doesn't have to use chemicals to produce PCBs. When creating a prototype, outsourcing a board takes time. Alternative is to make a PCB in-house. Using the wet process, in-house production presents problems with chemicals and disposing thereof. High-resolution boards using the wet process are hard to achieve and still, when done, one still has to drill and eventually cut out the PCB from the base material. CNC machine prototyping can provide a fast-turnaround board production process without the need for wet processing. If a CNC machine is already used for drilling, this single machine could carry out both parts of the process, drilling and milling. A CNC machine is used to process drilling, milling and cutting. Many boards that are simple for milling would be very difficult to process by wet etching and manual drilling afterward in a laboratory environment without using top of the line systems that usually cost multiple times more than CNC milling machines. In mass production, milling is unlikely to replace etching although the use of CNC is already standard practice for drilling the boards.
7,000.00 ج.م.‏

ER11 Collet Package (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm)

11.00.75
Type: ER11 QTY: 7 PCS Package : 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm
400.00 ج.م.‏

Stepper Motor Nema 23 Used 48mm

08.07.06
Nema 23 Used Motor Tested And Good Quality Length: 48mm Type: Nema 23 Work For CNC Machine and 3D Printer
80.00 ج.م.‏

Stepper Motor Nema 23 Used 52mm

08.08.06
Nema 23 Used Motor Tested And Good Quality Length: 52mm Type: Nema 23 Work For CNC Machine and 3D Printer
90.00 ج.م.‏

ER11 Collet Package (1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm)

11.00.76
Type: ER11 QTY: 13 PCS Package : 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm
750.00 ج.م.‏

ER11 Collet Package (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm) with ER11 A-5mm

11.00.77
Type: ER11 QTY: 7 PCS Package : 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm ER11 A-5mm
600.00 ج.م.‏

ER11 Collet 1mm

11.00.62
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 1.5mm

11.00.63
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 2mm

11.00.64
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 2.5mm

11.00.65
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 3.5mm

11.00.67
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 4mm

11.00.68
Brand: Other Type: Drill Chucks Is It a Set: No
65.00 ج.م.‏

ER11 Collet 4.5mm

11.00.69
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 5mm

11.00.70
Brand: Other Type: Drill Chucks Is It a Set: No
65.00 ج.م.‏

ER11 Collet 5.5mm

11.00.71
Brand: Other Type: Drill Bits Is It a Set: No
65.00 ج.م.‏

ER11 Collet 6mm

11.00.72
Collet Grip Range: .2162-.2362 Size: 6mm
80.00 ج.م.‏ 65.00 ج.م.‏

ER11 Collet 7mm

11.00.74
Collet Grip Range: .2556-.2756 Size: 7mm
65.00 ج.م.‏

ER16 Collet 2mm

11.00.78
Brand : Other Type : Drill Chucks Is It a Set : No
85.00 ج.م.‏

ER16 Collet 4mm

11.00.79
Brand : Other Type : Drill Chucks Is It a Set : No
85.00 ج.م.‏

ER16 Collet 8mm

11.00.80
Brand : Other Type : Drill Chucks Is It a Set : No
85.00 ج.م.‏

ER16 Collet 9mm

11.00.81
Brand : Other Type : Drill Chucks Is It a Set : No
85.00 ج.م.‏

ER20 Collet 2 - 1.5mm

11.01.83
110.00 ج.م.‏

ER20 Collet 2mm

11.00.83
110.00 ج.م.‏

ER20 Collet 3mm

11.00.84
Brand : Other Type : Drill Chucks Is It a Set : No
160.00 ج.م.‏ 125.00 ج.م.‏

ER20 Collet 4mm

11.00.86
Brand : Other Type : Drill Chucks Is It a Set : No
110.00 ج.م.‏

ER20 Collet 6mm

11.00.87
Brand : Other Type : Electronic Accessories
110.00 ج.م.‏

ER20 Collet 8mm

11.00.88
Brand : Other Type : Electronic Accessories
110.00 ج.م.‏

ER20 Collet 1/8 Inch

11.00.85
Brand : Other Type : Drill Chucks Is It a Set : No
110.00 ج.م.‏

ER20 Collet 1/2 Inch

11.00.91
Brand : Other Type : Electronic Accessories
110.00 ج.م.‏

ER20 Collet 10mm

11.00.89
Brand : Other Type : Electronic Accessories Is It a Set : No
110.00 ج.م.‏

ER20 Collet 9mm

11.01.89
Brand : Other Type : Electronic Accessories Is It a Set : No
110.00 ج.م.‏

ER20 Collet 12mm

11.00.90
Brand : Other Type : Electronic Accessories
110.00 ج.م.‏

ER20 Collet 13mm

11.01.90
Brand : Other Type : Electronic Accessories
110.00 ج.م.‏

ER25 Collet with size 3mm

11.00.92
Brand: Other Type: Drill Bits Is It a Set: No
130.00 ج.م.‏

ER25 Collet 5mm

11.00.94
Brand : Other Type : Electronic Accessories
130.00 ج.م.‏

ER25 Collet 6mm

11.00.95
Brand : Other Type : Electronic Accessories
130.00 ج.م.‏

ER25 Collet 8mm

11.00.96
Brand: Other Type: Drill Bits Is it set: no
130.00 ج.م.‏

ER25 Collet 1/8 Inch

11.00.93
Brand: Other Type: Drill Bits Is It a Set: No
130.00 ج.م.‏

ER25 Collet 1/2 Inch

11.00.100
Brand: Other Type: Drill Bits Is It a Set: No
130.00 ج.م.‏

ER25 Collet 10mm

11.00.98
Brand: Other Type: Drill Bits Is It a Set: No
130.00 ج.م.‏