Electronics

View as Grid List
Sort by
Display per page

6 Pin Female tall Header Connector socket

04.00.79
Six pin female tall stackable header connector socket for Arduino Shield.
$0.24

Servo Motor Torque 1.8 Kg.cm / 6 Vdc

05.00.138
This is a micro size metal gear servo motor. Unlike dc motors, with servo motors you can position the motor shaft at a specific position (angle) using control signal. The motor shaft will hold at this position as long as the control signal not changed. This is very useful for controlling robot arms, unmanned airplanes control surface or any object that you want it to move at ...
$7.50

8 Pin Female tall Header Connector socket

04.00.77
8 Pin Female tall stackable Header Connector socket for Arduino Shield.
$0.30

9V battery snap power cable to DC 9V clip male line battery adapter for arduino uno r3

05.00.72
Brand : Other Type : 3D Printer Accessories Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No
$0.60

GX16- 4 Pole Metal Male Female Panel Connector

05.00.84
THE CONNECTOR TAKES THE FORM OF PUSH BALL LOCKING CONNECTION,QUICK AND EASY FOR INSERTING AND WITHDRAWING. PRODUCT PARAMETER: INSULATION RESISTANCE: NORMAL TEMPERATURE 1500MΩ RATED CURRENT: 7A RATED VOLTAGE (VRMS): 200V SOLDER INNER DIAMETER: 2.5MM MAX CABLE DIAMETER: 5MM
$1.80

Servo Motor"SG90"

05.00.137
OPERATING VOLTAGE : 4.8~6.0V OPERATING SPEED : 0.12SEC/60 DEGREE(4.8V)~0.1SEC/60 DEGREE(6.0V) TORQUE : 1.6KG/CM(4.8V) TEMPERATURE RANGE : -30~+60℃ SERVO TYPE : ANALOG SERVO DIMENSION: 22.3 X11.8X26.3 MM. KIT INCLUDES SET OF 6 PIECES OF ARM SERVO HORN WITH DIFFERENT SIZES AND SHAPES, HORN MOUNTING SCREWS,SERVO MOUNTING SCREWS.
$4.20

5V 4-Phase 28BYJ-48 Stepper Motor + ULN2003 Driver Board

05.00.136
DESCRIPTION: Small size stepper motor ideal for driving mini DIY projects such as mini plotter, 3D printer and mini laser cutter. Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Drive Module Board Size: 2.8 x 2.8 x 2 cm Stepper motor Size: 3.2 x 3.2 cm
$5.40

GX16- 5 Pole Metal Male Female Panel Connector

05.00.86
GX16- 5 Pole Metal Male Female Panel Connector
$1.80

10 Pin Female Tall Header Connector Socket

04.00.78
This is a 10-pin female header, with extra long legs – great for stacking Arduino shields.
$0.36

10 Position DIP Switch 2.54mm

04.00.70
CONTACT RESISTANCE : 50MΩ 24VDC/100MA (AT INITIAL);100MΠTYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100MΩ TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47" X 0.4" X 0.43" (L*W*H)
$0.60

3D Printer Extruder FAN 5x5 12V

05.00.63
Brand : Gostime Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer Accessories
$2.10

DC Geared Motors for Robots Straight Shaft

05.00.139
This DC geared motor can be connected directly to our robot tires without any couplings. This is an advantage as it reduce assembly COMPLICATIONS. SPECIFICATIONS• VOLTAGE: 4.5 V DC• NO LOAD SPEED: 90 +/- 10RPM • NO LOAD CURRENT: 190MA (MAX.250MA) • MINIMUM TORQUE: 800 GM.CM
$1.80

Screw Terminal Block To Female DC Power Adapter - 2.1mm Plug

05.01.118
Our lower amperage LED power supplies do not have terminals. They have a Male DC connector that is similar to a traditional laptop computer power supply. DC coaxial connectors make it easy to connect and disconnect flexible LED strip lights from the power supply. This female 2.1mm 6-amp DC Coaxial Jack does not have wire attached.
$0.60

10 Piece DC Female to AV Screw Terminal Block Connector Kit for Power Adapter

05.00.118
Type: Adapters Compatible with: Surveillance Cameras Color: Black Number of Piece: 10 Details: Simple to use and install. Widely used for connection of Power Adapter, CCTV and other Power devices. Easy conversion from DC Female to Screw Terminal Block.
$5.40

3D PRINTER EXTRUDER FAN 5X5 5V

05.00.65
Brand : Yikeshu Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer AccessoriesBrand : Yikeshu Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer AccessoriesV
$1.80

6 Position DIP Switch 2.54mm

04.00.68
CONTACT RESISTANCE : 50MΩ 24VDC/100MA (AT INITIAL);100MΠTYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100MΩ TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47" X 0.4" X 0.43" (L*W*H)
$0.60

Coin Battery Holder 20mm

06.12.06
Brand : Other Type : Electronic Accessories
$0.60

PH-13 (1 Pin 0.100 inch Header Crimp Connector Housing-Single Row) (Pack Of 50)

04.00.130
Brand : Other Type : Electronic Accessories
$0.60

Smart Robot Car Chassis Kit For Arduino

08.02.05
A car chassis Trolley wheels 2 DC Gear Motor 2 Speed encoder 2 Fasteners 4 Caster 1 Four batteries box 1 A high-quality rocker switch Several screws and nuts
$9.00

Y-Tech YT-99 Set Of 10 Male Power Jack Connector - Black Red

05.00.41
Brand : Other Type : 3D Printer Accessories
$4.50

8 Position DIP Switch 2.54mm

04.00.69
8 Position DIP Switch 2.54mm
$0.60

9V Battery Holder with On/Off Switch

06.05.06
9 volt battery Holder with on/off power switch Works with 9V battery also known as: 1604 Easy to remove cover ; Cover slides and secures in place with screw if needed Pre-wired with a 6 inch wires (24 gauge) Pack of 1; Length: 2 3/4 inches or 69.85mm Width = 1 3/8 inches or 35mm Height = 7/8 inch or 22.2mm
$1.20

DC 12V Air blower,5cm Turbo blower,Humidifier fan,speed 4600RPM,3D Printer parts ,cooling fan,Locking protection

05.00.64
Brand : Other Power Source : Corded Electric Model Number : 1 Are batteries needed to power the product or is this product a battery : 0 Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : 0 Type : Oscillating Tools
$3.00

DOUBLE-END ALLIGATOR CLIP WIRE TEST CABLE CROCODILE 30CM 10-PIECE PACK

05.00.52
Material silicone cord + copper core + buckle alligator clip Features Length: 50cm; 2 alligator clip in each thread Application test wire connecting cable Packing List 10 x Alligator wire clip Brand: Other Type: Cable Accessories
$3.00

PH-14 (2 Pin 0.100 inch Header Crimp Connector Housing-Single Row) (Pack Of 50)

04.00.131
Brand : Other Type : Electronic Accessories
$0.90

Trolley caster wheel robot Eye Ball small round ball

05.00.05
Brand : Other Type : 3D Printer Accessories
$1.50

4 x AAA Battery Holder + On/Off Switch

06.09.06
4 x AAA Battery Holder + On/Off SwitchMATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
$0.90

PH-15 (3 Pin 0.100 inch Header Crimp Connector Housing-Single Row) (Pack Of 50)

04.00.132
Brand : Other Type : Electronic Accessories
$1.20

Slide Type Switch Module 1-Bit 2.54mm 1 Position Way DIP Red Pitch

04.00.65
Slide Type Switch Module 1-Bit 2.54mm 1 Position Way DIP Red Pitch
$0.24

Waterproof Thermal Probe Temperature Sensor DS18B20 for Arduino AVR PIC

05.00.31
This is a waterproofed version of the DS18B20 Temperature sensor for Arduino. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125 degree, the cable is jacketed in PVC keeping it under 100 degree Celsius. This sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.Usable with 3.0-5.5V systems.
$3.60

4 PIN - 2.8mm Connector Male & Female With Terminal

04.00.111
Brand : Other Type : Cable Accessories
$0.60

9V Battery Holder Without Plug

06.02.06
9V Battery Holder Material: plastic, Metal Cable length : 11cm / 4.7 Color: Black Net weight: 64 GmPackage Content: 1x 2 x AAA Battery Holder Type : Battery Power Converter
$0.72

PH-16 (4 Pin 0.100 inch Header Crimp Connector Housing-Single Row) (Pack Of 25)

04.00.133
Brand : Other Type : Electronic Accessories
$0.90

1x aa Battery Case Box Holder

06.01.06
This product is battery holder for 1x 18650 / 3.7V rechargeable batteries. Features: High-quality plastic holder Small size, easy to carry Takes 1 standard size 18650 batteries side by side to form a compact battery of 3.7Vx1 = 3.7V Embossed polarity marks
$0.30

PH-17 (5 Pin 0.100 Inch Header Crimp Connector Housing-Single Row) (Pack Of 25)

04.00.134
Brand : Other Type : Electronic Accessories
$1.20

Temperature Sensor With Socket

05.00.32
Brand : Other Type : Tempreture Sensor
$3.00

PH-18 (6 Pin 0.100" Header Crimp Connector Housing-Single Row) (Pack Of 25)

04.00.135
Brand : Other Type : Electronic Accessories
$1.50

Thermocouple Type K

05.00.33
Brand : Other Type : 3D Printer Accessories
$3.30

2 x AAA Battery Holder + On/Off Switch

06.00.06
2 X AAA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK
$0.60

9 PIN - 2.8mm Connector Male & Female With Terminal

04.00.113
Can be used to connect internal wiring. 2.8mm terminal for cable diameter up to 2.0mm. Can be used on cars, quad bike, tricycle, caravan, motorcycles, scooters, boat, snowmobile, etc. Easy to use,2.8mm 2/3/4/6/9 way connector with fixed hook.
$0.90

AC Power Connector With On/Off Switch - Panel Mount

06.02.01
IEC POWER JACK FOR CHASSIS MOUNT WITH 10A FUSE HOLDER FOR CLIP USE AND ON/OFF SWITCH, BLACK. REGULAR VOLTAGE: 250V / 10A TEMP.: -40° +-80°
$1.20

Male to Male Solderless Flexible Breadboard Jumper Cable Wires - 65Pcs

05.00.42
65PCS MALE TO MALE SOLDERLESS FLEXIBLE BREADBOARD JUMPER CABLE WIRES
$2.40

PH-19 (8 Pin 0.100 inch Header Crimp Connector Housing-Single Row) (Pack Of 25)

04.00.136
Brand : Other Type : Electronic Accessories
$1.80

3 x AA Battery Holder + On/Off Switch

06.07.06
3X AA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
$0.90

AC POWER CONNECTOR WITH FUSE HOLDER

06.11.06
AC POWER CONNECTOR WITH FUSE HOLDER CHASSIS MOUNT TYPE , USE WITH NORMAL AC POWER CABLE LIKE PC POWER CORD.
$1.20