Openbuilds

View as Grid List
Sort by
Display per page

Aluminium spacer 5.1 x 10 x 13.2mm

04.00.30
THEY ARE GREAT AT MAKING STURDY STANDOFFS/SPACINGS FOR YOUR PROJECTS.
$0.90 $0.30

Aluminum Brackets Corner 30x30

05.00.96
10pcs 3030 corner fitting angle aluminum 30 x 30 L connector bracket fastener Brand : Other Type : 3D Printer Accessories 30 x 30 aluminum strip angle Material: Aluminum Size: 30 x 30
$1.80 $1.50

Belt Clamp Crimp Style for 6 mm Belt

04.00.120
Use this nice metal crimp clamp to give your looped belt connections a finished look. "These are a great alternative to the 'zip tie' method." Pre-Bent for Easier Install Dimensions: 18 x 7 x 8mm (folded) Nickel-Plated Stamped Steel Color: Silver Brand : Other Type : 3D Printer Accessories
$0.60

Cross T-track Connector Set 30 Type T-slot Miter Jig Fixture Slot

05.00.151
Size‎:‎ 30x12.8mm Quantity‎:‎ 4pcs/set Machifit 200mm Cross T-track Connector Set 30 Type T-slot Miter Track Jig Fixture Slot Connector Machifit 200mm Cross T-track Connector Set 30 Type T-slot Miter Track Jig Fixture Slot Connector Features‎:‎ It is a cross connector for the T track and it can make a cross T track rail‎.‎ Suitable for woodworking‎.‎ Durable and convenient to use‎.‎ Package Included‎:‎ 1 x30 TypeCross T‎-track Connector ‎(‎4pcs/set‎)‎ Notice‎:‎ 1‎.‎ Please allow a bit error due to manual measurement‎.‎ please make sure you do not mind before you bid‎.‎ 2‎.‎ The color may have different as the difference display‎,‎ pls understand‎.
$30.00 $27.00

Cube Corner Connector

05.00.94
THESE THREE WAY CUBE CORNER CONNECTORS ARE MILLED WITH PRECISION FROM SOLID ALUMINUM. MOUNT THIS CORNER TO V-SLOT LINEAR RAIL USING M5X8MM LOW PROFILE SCREWS AND M5 TEE NUTS. COMPATIBLE WITH 20MM V-SLOT LINEAR RAIL ANODIZED ALUMINUM COLOR: BLACK
$3.60 $3.00

End Cap (Aluminum)

04.00.80
"These End Caps were designed to be stack-able, so they fit all sizes of V-Slot Linear Rail!" Qty :1 Anodized : Aluminum Color : Black Brand : Open Builds Type : 3D Printer Accessories
$3.00 $1.80

GT2 40 Tooth 5mm Bore Timing Belt Pulley for 3D Printer

04.00.15
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY
$4.20 $3.00

Micro Limit Switch Plate (Steel )

06.03.02
QUANTITY: 1 (BUILD PLATE ONLY) THICKNESS : 2MM THICK MATERIAL : STEEL COLOR : BLACK
$0.90 $0.60

OpenBuilds Mini V Wheel

05.00.01
Rockwell Hardness: M80 Compression Strength: 63MPA OD: 15.23 ID: 9.974 +/- 0.026 Thick: 8.8 Delrin Color: Black
$3.00 $2.70

V-Slot 20x20 Linear Rail

stock
High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.
$4.80

V-Slot 20x40 Linear Rail

stock
High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature. V-Slot Linear Rail is the ultimate solution combining both linear motion and a modular, structural framing system. It's lightweight yet rigid and provides an ultra smooth track for precise motion. In 2013, OpenBuilds created V-Slot Linear Rail and has added a library of compatible modular Parts which today is known as the OpenBuilds System. Over 1,000,000 feet of V-Slot has been shipped to businesses, classrooms, laboratories and makers all over the world! Much like working with lumber, you can cut V-Slot on a chop saw (using a metal blade) or even use a hacksaw. From there, you simply use a screw driver to make the connections.
$9.00

V-Slot 20x60 Linear Rail

stock
High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.
$14.40

V-Slot 20x80 Linear Actuator Bundle

Stock
*The V-Slot® 20x80 Linear Actuator (Belt Driven) is a great component in any linear system. *It’s fast and modular which means it can easily be built into any linear application. *Take advantage of this amazingly affordable linear motion system today! V-slot Expensive price because it's an original openbuilds
$48.00

1605 Ballscrew And Nut 300mm Bearing

05.10.170
The ball screw nut is the ideal driving device for rotary motion and linear movement‎.‎ Its structure is characterized by a screw groove with a screw nut with a ball ‎(‎as intermediate transmission element‎)‎‎,‎ to reduce friction‎.‎ Specifications‎:‎ Material‎:‎Bearing steel Color‎:‎silver Size‎:‎30.5x 1cm Diameter‎:‎1.7cm Features‎:‎ 1‎.‎Rolling ball precision‎,‎ greatly reducing the friction resistance‎.‎ 2‎.‎Rotary motion and linear movement are converted to each other‎,‎ and the steel ball is used as a rolling medium‎.‎ 3‎.‎Durable‎,‎ long service life Package include‎:‎ 1xC7 ballscrew
$96.00 $84.00

Aluminium spacer 5.1 x 10 x 1/4 Inch

04.00.28
Aluminium spacer 5.1 x 10 x 1/4 Inch They are great at making sturdy standoffs/spacings for your projects.The spacer has M5 ID to give a thicker wall to keep the screw snug and centered.These spacers can be used in all sorts of builds. For example, We use the spacers to create a space between the stepper motor and motor mounting plate. This allows for room to mount hardware such as couplers ...
$0.60 $0.18

GT2 60 Tooth 5mm Bore Timing Belt Pulley for 3D Printer

05.00.159
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY
$7.20 $6.60

Linear Actuator End Mount (Aluminum)

06.07.03
Brand : Other Type : 3D Printer Accessories
$12.60

M3 reprap timing belt tensioner spring synchronous belt locking torsion sprnig

04.00.218
Brand : Other Material : Steel Quantity : 50
$0.36 $0.18

RJ45 - 8pin on PCB Plastic

04.00.125
Brand : Other Type : Cables Compatible with : Electronic Accessories
$0.36

Small Smart Car Model Plastic Robot Tire Wheel 66MM FZ0394

05.00.07
DIAMETER: 66MM WIDTH: 28MM COLOR: YELLOW AND BLACK WEIGHT:38G PACKING INCLUDED:1 X ROBOT TIRE (WHEEL)
$1.80 $1.20

Spacer Block 6mm for z axis (Acrylic)

06.19.04
The spacer block 6mm for z axis Printer is manufactured by OpenBuilds and was added around February 2019. This version of the Printer comes in Millimiters : 6 mm.
$0.90

1605 Ballscrew And Nut 250mm Bearing

05.08.170
Specification‎:‎ Rolling Block Material‎:‎ bearing steel Total length‎:‎250mm Features‎:‎ Screw are used in TBI screw‎,‎ good finish‎,‎ uniform hardness‎,‎ high accuracy‎.‎ Between the feed screw nut having a spiral groove provided with a ball ‎(‎as intermediate transmission member‎)‎‎,‎ to reduce friction‎.‎ High transmission efficiency‎,‎ high positioning accuracy‎,‎ long service life‎,‎ transmission reversibility‎.‎ Caution‎:‎ Do not unscrew the screw nut ‎(‎‎(‎to prevent detachment screw‎)‎
$84.00 $72.00

GT2 20 Tooth 6.25 mm Bore Timing Belt Pulley for 3D Printer

04.00.05
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY
$2.40 $1.80

T Joining Plate (Steel )

06.05.02
THESE PLATES CAN BE MOUNTED TO V-SLOT LINEAR RAIL
$1.80 $1.50

T8 1000mm Lead Screw 8mm Thread Lead Screw 2mm Pitch Lead Screw with Brass Nut

05.07.170
Lead Screw T8 8mm,1000mm 3D Printer Accessory Stainless Steel Trapezoidal Diameter 8 mm Thread Pitch 2 mmMaterial Stainless steel Diameter 8 mm Thread Pitch 2 mm Length 1000 mm
$24.00 $21.00

V-Slot 20x40 Linear Actuator Bundle

Stock
*The V-Slot® 20x40 Linear Actuator (Belt Driven) is a great component in any linear system. *It’s fast and modular which means it can easily be built into any linear application. *Take advantage of this amazingly affordable linear motion system today!
$60.00

Cross Joining Plate (steel)

06.07.02
These heavy duty Cross Joining Plates are perfect for any project requiring connection strength. These Plates can be mounted to V-Slot Linear Rail using 10mm Low Profile Screws and Tee Nuts. 6105 - T5 Plate 100mm x 60mm 4mm Thick M5 Diameter Screw Holes, 20mm Spacing Clear Anodized Aluminum Color: Silver
$2.10

Eccentric Spacer 1/4 Inch OpenBuild

04.00.52
These eccentric spacers, available in lengths of 1/4 inch. are used with Openbuilds V-Slot aluminum extrusions to create simple, affordable linear motion systems. The spacer has an off-center 5mm bore, which allows you to tighten the wheel against the extrusion.
$2.70 $1.50

GT2 16 Tooth 8mm Bore Timing Belt Pulley for 3D Printer ( double head)

04.00.07
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY
$2.40

Pair of Multimeter Test Probe Leads Banana Plug Connectors 1000V 10A

05.00.59
Brand: Other Type: Cables Compatible with: Multi
$1.80

U-groove Guide Wheel For 3D Printer Extruder

05.00.24
HIGH PRECISION TO ENSURE SMOOTH RUNNING, LOW NOISE, APPLICABLE TO OTHER HIGH-PRECISION, HIGH-SPEED EQUIPMENTS AND INSTRUMENTS.
$1.50

V-Slot 20x60 Linear Actuator Bundle

Stock
*The V-Slot® 20x60 Linear Actuator (Belt Driven) is a great component in any linear system. *It’s fast and modular which means it can easily be built into any linear application. *Take advantage of this amazingly affordable linear motion system today!
$87.00

1605 Ballscrew And Nut 270mm Bearing

05.09.170
Specification‎:‎ Rolling Block Material‎:‎ bearing steel Total length‎:‎270mm Features‎:‎ Screw are used in TBI screw‎,‎ good finish‎,‎ uniform hardness‎,‎ high accuracy‎.‎ Between the feed screw nut having a spiral groove provided with a ball ‎(‎as intermediate transmission member‎)‎‎,‎ to reduce friction‎.‎ High transmission efficiency‎,‎ high positioning accuracy‎,‎ long service life‎,‎ transmission reversibility‎.‎ Caution‎:‎ Do not unscrew the screw nut ‎(‎‎(‎to prevent detachment screw‎)‎
$90.00 $78.00

2 Hole Joining Strip Plate (Steel)

06.00.02
Material : Steel Colour : Black
$0.90 $0.60

C-Beam Linear Actuator Bundle

Stock
*The C-Beam Linear Actuator (Belt Driven) is a great component in any linear system. *It’s fast and modular which means it can easily be built into any linear application. *Take advantage of this amazingly affordable linear motion system today!
$72.00

GT2 20 Tooth 5mm Bore Timing Belt Pulley for 3D Printer

04.00.03
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY
$1.80

M3 Copper Spacer 14mm F/F (10 PCS)

04.00.38
Brand : Other Type : 3D Printer Accessories
$1.80

OpenBuilds solid V-wheel For 3D Printer

05.00.10
Rockwell Hardness: M80 Compression Strength: 63MPA OD: 15.23 ID: 9.974 +/- 0.026 Thick: 8.8 Delrin Color: Black
$3.30 $2.10

Printed 22mm Flange Nut For 3D Printer CNC Lead Screw 8mm Pitch 2mm

02.00.19
Printed 22mm Flange Nut For 3D Printer CNC Lead Screw 8mm Pitch 2mm Suitable for 3D printer CNC Z axis Lead screw diameter 8mm Pitch 2mm Lead 8mm Hight 15mm
$1.50 $1.20

3 Hole Joining Strip Plate (Steel)

06.01.02
Quantity: 1 (Build Plate Only) brand :OpenBiulds Thickness : 2mm Thick 60mm x 18mm Material : steel Color : Black
$0.60

GT2 30 Tooth 5mm Bore Timing Belt Pulley for 3D Printer

04.00.14
IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY
$3.00

M3 Copper Spacer 10mm F/F (10 PCS)

04.00.36
Brand : Other Type : 3D Printer Accessories
$1.50

Red Caster Wheel

05.00.11
Wheel Material Polyurethene, Rubber, Polypropylene Product Type Surgical Wheel, Furniture Caster, Heavy Duty Wheel Load Capacity 100kg to 800kg Diameter (mm) 50mm to 200mm Color Red Width (mm) 25mm to 50mm
$3.00 $1.50

T8 lead screw housing nut silver

05.00.100
Brand : Other Type : 3D Printer Accessories
$4.50

V-Slot 20x80 Linear Actuator Bundle (With Lead Screw)

Stock
*The V-Slot® 20x80 Linear Actuator (Belt Driven) is a great component in any linear system. *It’s fast and modular which means it can easily be built into any linear application. *Take advantage of this amazingly affordable linear motion system today! V-slot Expensive price because it's an original openbuilds
$73.50